Aluminium with hidden fixings or profiled steel: comparison, ventilated facade, quantities and installation of metal...
Demande de devis
Latest posts
-
Metal facade cladding: aluminium or steel?Read more -
Metal roof flashings: ridge, verge, wall flashing and fillers09/22/2026Read moreRidge, verge, wall flashing, filler, hip, fascia: what each metal roof flashing does, where it goes and how much to...
-
Steel roofing sheets: choosing the profile, pitch and fitting09/22/2026Read moreProfiles 29C, 850+, 35C or 45C, pitch, condensation, overlaps and fixings: the guide to choosing and fitting a steel...
-
Aluminium window sill: measurements, slope and installation09/22/2026Read moreAt least 5° of slope, a 30–50 mm projection, a drip edge and upstands: the complete guide to measuring, choosing and...
-
DEV 33 half-round gutter accessories: installation guide05/06/2026Read moreAccessories for DEV 33 Ø 100 mm half-round gutters: fascia brackets, outlets, 90° angles, stop ends – selection and...
-
DEV 33 half-round gutter and accessories: a complete guide04/18/2026Read moreDiscover the complete range of half-round gutters developed by SuissePliage — brackets, outlets, downspouts, water...
-
Order custom bent sheet metal online04/03/2026Read moreFind out how to order your custom bent sheet metal in 3 minutes with the SuissePliage configurator: 20 profiles,...
-
What is the price of an aluminium coping in Switzerland?03/28/2026Read moreWhat is the price of aluminum coping in Switzerland in 2026? Ranging from CHF 35 to 120 per linear meter depending on...
-
How to Choose the Right Coping Width for Your Parapet?03/24/2026Read moreSeries 150, 200, 250, 300 mm... How to choose the right coping width? This guide explains everything in 5 minutes.
How to Choose the Right Coping Width for Your Parapet?
for your coping
An incorrectly sized coping cannot properly fulfil its waterproofing role. Too narrow, it lets water through. Too wide, it overhangs unnecessarily and may suffer from wind. Here is how to choose the right series in 3 simple steps.
Step 1 — Measure your wall or parapet
Use a tape measure to measure the total width of the top of your wall or parapet, including the thickness of any render. This dimension determines which coping series to choose.
Total width
Measure the top of the wall from edge to edge, including render.
Side returns
Allow 30 to 40 mm of return on each side for waterproofing.
When in doubt
Always choose the larger series — wider = better protected.
Step 2 — Choose the corresponding series
Each SuissePliage series is designed to cover a range of wall widths. Find your measurement in the table below:
| Wall width | Recommended series | Max. coverage |
|---|---|---|
| Up to 110 mm | Series 150 mm | 110 mm |
| Up to 160 mm | Series 200 mm | 160 mm |
| Up to 210 mm | Series 250 mm Popular | 210 mm |
| Up to 260 mm | Series 300 mm | 260 mm |
| Up to 310 mm | Series 350 mm | 310 mm |
| Up to 360 mm | Series 400 mm | 360 mm |
Step 3 — Plan your accessories
Each SuissePliage series includes a complete set of compatible accessories for a professional installation:
90° Corners
For internal and external corners — clean finish without on-site cutting.
Junction sleeves
To join two copings end-to-end with guaranteed waterproofing.
End caps
To neatly close off the ends of the wall.
Grooved brackets
For concealed clip fixing — no visible screws.
When in doubt between two series, always choose the larger one — a slightly wider coping offers better protection and a neater finish.
Found your series?
Configure your custom copings and get an instant price, no commitment.
Related posts
-
What is the price of an aluminium coping in Switzerland?
Posted in: Guides & Tips03/28/2026What is the price of aluminum coping in Switzerland in 2026? Ranging from CHF 35 to 120 per linear meter depending on...Read more -
Order custom bent sheet metal online
Posted in: Guides & Tips04/03/2026Find out how to order your custom bent sheet metal in 3 minutes with the SuissePliage configurator: 20 profiles,...Read more -
DEV 33 half-round gutter and accessories: a complete guide
Posted in: Guides & Tips04/18/2026Discover the complete range of half-round gutters developed by SuissePliage — brackets, outlets, downspouts, water...Read more -
DEV 33 half-round gutter accessories: installation guide
Posted in: Guides & Tips05/06/2026Accessories for DEV 33 Ø 100 mm half-round gutters: fascia brackets, outlets, 90° angles, stop ends – selection and...Read more -
Aluminium window sill: measurements, slope and installation
Posted in: Guides & Tips09/22/2026At least 5° of slope, a 30–50 mm projection, a drip edge and upstands: the complete guide to measuring, choosing and...Read more
Leave a comment
Comments
taille couvertine
By: Matilda On 03/28/2026super article tres intéressant , je ne savais pas quoi prendre et maintenent j'ai tout compris.
Replied by: Laurent Baszanger On 05/22/2026